printer default destination

["Dr. Hein" <s.hein@xxxxxxxxxx>]

Dear Colleague,

this (first) time,  I didn't get my printer up and running with your
apsfilter-6.1.1  ./SETUP tool  [past upgrading  to FreeBSD4.3].

The test page is still nicely printed.
Calling 'lp  <file...> ' ,however, results in  a message:

'lp: error - no default destination available.'

- How and where can I make it 'available' ?

With thanks and best regards,

Steffen,
Spinner GmbH., Munich
Aiblinger Str .30
D-83620 Westerham
Phone: +49.8063.971235
Fax:: +49.8063.971210
#APS1_BEGIN:Printer1
# - don't delete start label for apsfilter printer1
# - no other printer defines between BEGIN and END LABEL
lp|Printer1 auto:\
    :lp=/dev/lpt0:\
    :if=/etc/apsfilter/basedir/bin/apsfilter:\
    :sd=/var/spool/lp:\
    :lf=/var/spool/lp/log:\
    :af=/var/spool/lp/acct:\
    :mx#0:\
    :sh:
raw1|Printer1 raw:\
    :lp=/dev/lpt0:\
    :if=/etc/apsfilter/basedir/bin/apsfilter:\
    :sd=/var/spool/raw1:\
    :lf=/var/spool/raw1/log:\
    :af=/var/spool/raw1/acct:\
    :mx#0:\
    :sf:\
    :sh:
# APS1_END - don't delete this