Re: printer default destination

[Andreas Klemm <andreas@xxxxxxxxxxx>]

Hi!

Please use mailinglists for support. Subscribe at least to apsfilter-help.

See www.apsfilter.org, whats available.

I assume you choosed different printer names than SETUP
suggested. Now you don't have a default printer "lp".

Use lpr -P printername to address other printer than default
printer "lp".

Look into /etc/printcap, which names you choosed.

And please use the mailinglists for support.

More mails to my priovate account will silently be ignored.

Reply-To: set.

	Andreas ///

On Mon, Jun 11, 2001 at 11:19:15AM +0200, Dr. Hein wrote:
> Dear Colleague,
> 
> this (first) time,  I didn't get my printer up and running with your
> apsfilter-6.1.1  ./SETUP tool  [past upgrading  to FreeBSD4.3].
> 
> The test page is still nicely printed.
> Calling 'lp  <file...> ' ,however, results in  a message:
> 
> 'lp: error - no default destination available.'
> 
> - How and where can I make it 'available' ?
> 
> With thanks best regards,
> 
> Steffen,
> Spinner GmbH., Munich
> Aiblinger Str .30
> D-83620 Westerham
> Phone: +49.8063.971235
> Fax:: +49.8063.971210

> #APS1_BEGIN:Printer1
> # - don't delete start label for apsfilter printer1
> # - no other printer defines between BEGIN and END LABEL
> lp|Printer1 auto:\
>     :lp=/dev/lpt0:\
>     :if=/etc/apsfilter/basedir/bin/apsfilter:\
>     :sd=/var/spool/lp:\
>     :lf=/var/spool/lp/log:\
>     :af=/var/spool/lp/acct:\
>     :mx#0:\
>     :sh:
> raw1|Printer1 raw:\
>     :lp=/dev/lpt0:\
>     :if=/etc/apsfilter/basedir/bin/apsfilter:\
>     :sd=/var/spool/raw1:\
>     :lf=/var/spool/raw1/log:\
>     :af=/var/spool/raw1/acct:\
>     :mx#0:\
>     :sf:\
>     :sh:
> # APS1_END - don't delete this


	Andreas ///

-- 
Andreas Klemm - Powered by FreeBSD 4.3
Need a magic printfilter today ? -> http://www.apsfilter.org/

PGP signature