thanks and a problem ...

[miansancor@xxxxxxxx]

    I just installed the apsfilter shipped with slackware 8.0. I
installed my usb canon s450 printer with canon 6200 stp driver. The test
page was fine BUT VERY SMALL (1/4 OF A4 paper), then I try to print from
the netscape and kwriter and it is the same, it prints fine but very
small. I change the resolution from 300 to 720 and is still the same.
    any idea what must I do?
#
# Copyright (c) 1983 Regents of the University of California.
# All rights reserved.
#
# Redistribution and use in source and binary forms are permitted
# provided that this notice is preserved and that due credit is given
# to the University of California at Berkeley. The name of the University
# may not be used to endorse or promote products derived from this
# software without specific prior written permission. This software
# is provided ``as is'' without express or implied warranty.
#
#	@(#)etc.printcap	5.2 (Berkeley) 5/5/88
#
# DecWriter over a tty line.
#lp|ap|arpa|ucbarpa|LA-180 DecWriter III:\
#	:br#1200:fs#06320:tr=\f:of=/usr/lib/lpf:lf=/usr/adm/lpd-errs:
#lp:lp=/dev/lp0:sd=/usr/spool/lp0:of=/usr/lib/lpf: lf=/usr/adm/lpd-errs
#
# Generic printer:
lp:lp=/dev/lp0:sd=/var/spool/lpd:sh
#
# typical remote printer entry
#ucbvax|vax|vx|ucbvax line printer:\
#	:lp=:rm=ucbvax:sd=/usr/spool/vaxlpd:lf=/usr/adm/lpd-errs:
#varian|va|Benson Varian:\
#	:lp=/dev/va0:sd=/usr/spool/vad:mx#2000:pl#58:px#2112:py#1700:tr=\f:\
#	:of=/usr/lib/vpf:if=/usr/lib/vpf:tf=/usr/lib/rvcat:cf=/usr/lib/vdmp:\
#	:gf=/usr/lib/vplotf:df=/usr/local/dvif:\
#	:vf=/usr/lib/vpltdmp:lf=/usr/adm/lpd-errs:
#versatec|vp|Versatec plotter:\
#	:lp=/dev/vp0:sd=/usr/spool/vpd:sb:sf:mx#0:pw#106:pl#86:px#7040:py#2400:\
#	:of=/usr/lib/vpfW:if=/usr/lib/vpsf:tf=/usr/lib/vcat:cf=/usr/lib/vdmp:\
#	:gf=/usr/lib/vplotf:vf=/usr/lib/vpltdmp:lf=/usr/adm/lpd-errs:\
#	:tr=\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\
#\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\
#\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n:
#
#lp|panasonic:lp=/dev/lp1:sd=/usr/spool/lp/panasonic:lf=/usr/bin/mail:mc#1:\
#             ft=$$c$$p$$r$$f:hl#2:fl#3:ht=$$c$$n$$r$$t:sh:
#
# HP Laser jet plus
#lp|hpj:\
#        :lp=/dev/lp1:\
#        :sd=/usr/spool/lp1:\
#        :mx#0:\
#        :of=/usr/spool/lp1/hpjlp:
#        :lf=/usr/spool/lp1/hp-log:
#
#lp|Generic dot-matrix printer entry:\
#        :lp=/dev/lp1:\
#        :sd=/var/spool/lp1/lp:sh:\
#        :if=/usr/bin/lpf:\
#        :df=/var/spool/lp1/filter.ps:\
#        :tf=/var/spool/lp1/filter.ps:\
#        :af=/var/spool/lp1/lp-acct:\
#        :lf=/var/spool/lp1/lp-err:
# APS1_BEGIN:printer1
# - don't delete start label for apsfilter printer1
# - no other printer defines between BEGIN and END LABEL
auto1|Printer1 auto:\
    :lp=/dev/usblp0:\
    :if=/etc/apsfilter/basedir/bin/apsfilter:\
    :sd=/var/spool/lpd/auto1:\
    :lf=/var/spool/lpd/auto1/log:\
    :af=/var/spool/lpd/auto1/acct:\
    :mx#0:\
    :sh:
raw1|Printer1 raw:\
    :lp=/dev/usblp0:\
    :if=/etc/apsfilter/basedir/bin/apsfilter:\
    :sd=/var/spool/lpd/raw1:\
    :lf=/var/spool/lpd/raw1/log:\
    :af=/var/spool/lpd/raw1/acct:\
    :mx#0:\
    :sf:\
    :sh:
# APS1_END - don't delete this