hpijs installation problem

[Iiro Jantunen <froggie@xxxxxxxxxxxxxxxxxx>]

Hi! 

I've got a problem with apsfilterconfig. I tried to install HP 940 (HP
940C) with hpijs as a driver. The printer is attached to the parallel port
of my computer (I have no USB, old computer...). I use Debian GNU/Linux
Potato, partly upgraded to woody (GS 6.53). I have hpijs 1.0.4.

I chose: 
    (1)     Printer Driver Selection                [ijs/DESKJET_940]
    (2)     Interface Setup                         [parallel]
    (3)     Paper Format                            [a4]
    (4)     Printing Quality                        [medium]
    (5)     Color Mode                              [full]
    (6)     Print Resolution in "dots per inch"     [600x600]
    (7)     Default Printing Method                 [auto]

And then asked for test page printing:
Printing Test page using:
gs -q -dBATCH -dNOPAUSE -dPARANOIDSAFER -dSAFER -r300x300
-sDEVICE=ijs -sPAPERSIZE=a4 
-sIjsParams='Quality=0,ColorMode=2,MediaType=0,PenSet=2'
-sDeviceManufacturer=HEWLETT-PACKARD -sDeviceModel='DESKJET 940'
-sIjsServer=hpijs -sOutputFile='/tmp/apsfilter4984/test_page.aps'
setup/test.ps

Creating test page...
unable to set key=OutputFile, value=/tmp/apsfilter4984/test_page.aps
unable to set key=Quality, value=0
unable to set key=ColorMode, value=2
unable to set key=MediaType, value=0
unable to set key=PenSet, value=2
unable to set key=Quality, value=0
unable to set key=ColorMode, value=2
unable to set key=MediaType, value=0
unable to set key=PenSet, value=2
unable to set key=Quality, value=0
unable to set key=ColorMode, value=2
unable to set key=MediaType, value=0
unable to set key=PenSet, value=2
unable to set key=Quality, value=0
unable to set key=ColorMode, value=2
unable to set key=MediaType, value=0
unable to set key=PenSet, value=2
unable to write to output, fd=0, count=1000: Bad file descriptor

... the last row repeated infinitely many times.

What was wrong? Can you give me some advice? Thanks in advance. 

I have tried other the same 'gs ...' command with a bit different settings
on the root console, still with the same result. I have also tried if the
port was wrong.

Ich hoffe jemanden kannt mir ein bischen hier hilfen.

-- 
___________________________________________________________________
Iiro Jantunen                          http://www.hut.fi/u/ijantune
Iiro.Jantunen@hut.fi                   SMT 12 K 135 
+358 400 576492 (mobile)               FIN-02150 ESPOO